More 2ft inside 90 module progress

This yet to be named module now has roadbed installed on the mainlines as well as the branchline. 

Brass screws are installed to solder the rails to. 

Next step is to drill alignment pin holes on each frontier. 

Michael Sherbak

--
Michael Sherbak

2ft inside 90 progress

Got the waffle painted and have started on roadbed installation. 

This module has the 8/10 mains to the inside at 32" and 34" radii curves and the branchline radius is 45"

--
Michael Sherbak

Gandy dancers are working today

One of two 4ft Outside 90 deg curves being finished up after years of delays. The outside radius of the module is 48" so the track radii are at 40", 38" and 31" 

--
Michael Sherbak

Speed-mo

I first wrote about this concept back in 2012 :

http://sandsofnc-module-building.blogspot.com/2012/06/speed-mo-modular-experiment.html

It is finally getting closer to reality.

Grain Elevator Modules              
_____________________________________________________________

     The 'easy' end has alignment pin holes drilled and track installed part way across the module.  Will get the 'hard' end drilled this evening and maybe the track down onto the end of the module  

Garden City CO-OP
_____________________________________________________________

Working on the other end of the grain elevator module set. This will be an 18ft

 long married set capable of handling two 20 car grain trains one inbound (empty)

 and one outbound (loaded). Anhydrous ammonia tanks will be located here as well to bring in nitrogen fertilizer by railcar   

More Module progress - These two modules are now fully operational                
_____________________________________________________________

A crossover to the 10 as well as a crossover between the 8 and the 10 

A standard 3 track in/out "Fisher #1" 

Scenery will be rails through the countryside for scenery.